*Optional ATEX Zone 1 Explosion Proof Rating

Ultra Portable Industrial Rovver System Overview:

RX95 Crawler

• The RX95 crawler can inspect areas from 100 up to 200mm (4 to 8 in.)
• Cable length 100m (328 Ft.)
• Powerful six-wheel drive (steerable)
• Location transmitter
• Crawler wheels for all surface conditions
• Constant monitoring by pitch and roll sensor
• Constant monitoring of the internal pressure and temperature
• IP68 up to 10m Water Depth

PTP7011 Camera

• Pan & Rotate Camera
• Endless Rotation
• -20° to 110° Pan Range
• Auto Focus
• Integrated laser allows measurement of defects

VC200 Display

• 800 x 600 touch screen display
• Video recording in MPEG-4 AVC/H.264, picture recording in .BMP
• Data storage on an internal CF-card (64GB) 

• Data transfer via USB and Ethernet
• Low weight and ergonomic design for optimal operator convenience

RMX100 Cable Reel

• 100 m armored camera cable
• Adjustable brake
• Hand crank
• Dirt wiper
• Winding support
• Telescopic bar with control panel mount

Transportation Case

• Dimensions: 560 x 455 x 265mm (22 x 18 x 10 in.) 

Features and Benefits of the Industrial Pipe Inspection System:

• The PTP70II pan & tilt head camera features a constantly upright picture, endless rotation and a panning range of -20° up to +110° thus enabling a comprehensive inspection from every viewing angle and in each position. Inspect area and pipes from 100 to 300mm.
• The multi-functional, portable VisionControl control panel allows carrying out inspections according to predefined standards, while the user can freely configure the text generator as desired. Additionally it is possible to record the inspection video or to take pictures. With a daylight viewable 800 x 600 pixel touch screen display including a virtual keyboard and intuitively operable control elements the VC200 offers everything required for a user-friendly, efficient inspection.
• The light weight and compact design of the Industrial Rovver makes it perfect for plant inspections or wind turbines, where portability is a must.
• The cable reel provides 100m (328 ft.) of coninious cable enabling the Rovver to go where push rod camera systems cannot reach.
• The RX95 is fully steerable and allows the operator to keep the robotic camera sytem centered in the pipe without roll over and to turn 90 degree bends.
• Integrated laser to determine crack widths allows measurement of defects and a better determination of damage to your industrial systems.

Wind Power requires regular maintenance to check for corrosion, pitting, cracks and other defects. The inside of wind turbine blades need to be visually inspected to see if these defects are in place. Other remote visual inspection method do not offer the distance or ability to inspect the large diameter and long blades.

New construction: Many power generating plant construction projects may present potential conflicts with existing underground utilities. Experience has shown that relying on information from old plans and records regarding the location of underground utilities may not be the wisest decision. Often, these subsurface facilities are not where records say they are or they are not shown on the records at all. Once construction begins, this inaccurate information can result in costly conflicts, damage, delays, service disruptions, redesigns, claims and even injuries should a backhoe hit an underground pipeline. Damage can be minimized by conducting a survey of underground piping using robotic pipe inspection cameras and mapping the location of existing pipelines and utilities with the sonde locator.

Nuclear Power Plants: Aging of underground piping and tanks has gained increased attention in the nuclear industry, particularly concerning piping systems that may contain some radioactive effluents or environmentally hazardous materials. The Nuclear Strategic Issues Advisory Committee drafted the Underground Piping and Tanks Integrity Initiative in 2010 to provide reasonable assurance of structural and leakage integrity of underground pipes. The Rovver robotic pipe inspection camera is perfect for inspections at nuclear power plants.

Process lines need to be inspected for condition.  The pan and rotate push camera is perfect for navigating the complex geometry of pipes and connections to check pipe walls, welds and joints for pitting, corrosion, erosion, cracking, scaling and other problems.

Cleaning Validation can be performed at pharmaceutical and chemical plants with Rovver robotic crawler camera. Process lines at these plants need to be cleaned of previous product ingredients or the next batch may be contaminated.  The pan and rotate camera can negotiate larger pipes and longer distances.

Steam feed lines need to be inspected for interior condition. The rovver robotic pipe inspection camera can use its pan and tilt camera to see scale build up, pitting, corrosion, cracking and other defects with ease.

FOSAR: Locate foreign objects, loose parts and other debris in industrial piping. The rovver robotic pipe inspection camera can use its pan and rotate pipe camera to view and locate more debris, and foreign objects than other remote visual inspection methods. Once the pan and tilt push camera locates the foreign material and attached motorized retrieval tool can then be used to remove the objects without tear down.